• LocationPontypool, Wales, Osborne Road, NP4 6LT**
  • Our Working HoursOpening times: 24 hours a day*
  • Phone Us!Free phone: 0800 051 8637

Free Phone : 0800 051 8637

We Can Help Today!

Express Pontypool glaziers replace glass for a variety of reasons. we provide an emergency response service for broken glass repairs where we would board the windows for your security and then replace the glass usually within 48 hours in and around the Pontypool area.

Glass in Pontypool commercial properties that should be but doesnt meet safety requirements can be replaced with safety glass. All enquiries are welcome with free estimates and quotes by phoning our Pontypool team.

Glass for use in Pontypool domestic properties typically comes in two varieties; single or double-glazed, with a choice of either float/annealed or toughened glass. Single-glazed windows with float glass can normally be fitted on the same day. Our Pontypool glaziers are able to replace glass from either the outside or the inside of properties, if the framework allows it. If required, we can source scaffolding and/or lifting vehicles for high glass installations.

Contact us

Pontypool Glazing Testimonials

Customer Name: Mrs M Heppolette
I called your office in my hour of need to find a an engineer to come out asap. There was an immense burden taken off me when your lady employee informed me that one of your plumbers would call to undertake the work last Saturday. I want to express my sincere thanks and appreciation. Your engineer did an excellent job in his determination and perserverance to succeed.

Want to speak to an expert?
Call: 0800 051 8637

Example Of Our Glass Services

Cat & Dog Flaps
Given a sufficiently large pane of glass, we can manufacture and install a pane of glass, with a hole pre-cut for the flap. We cannot work on existing toughened glass (due to the high tension in the glass), any pressure applied to the glass would cause the destruction of the glass. It is possible to cut normal glass in situ, but as this is at the owner's own risk, it is not recommended. There must be a minimum clearance of 150mm between the edge of the glass, and the edge of the hole of the flap, so the glass is able to go through the toughening process and remain intact.

Book one of our experts, today

Click To Get a Free Quote

Calls made will not be charged

Top